Hand-held EtCO2+SpO2 monitor AM-HC-25
Product Introduction
The HC-25 CO2/SpO2 monitor is a compact handful monitor which provides accurate CO2 /SpO2 monitoring. The system’s reliable performance, ease of use, flexible design and affordable cost makes it the ideal monitoring solution for adult, pediatric and infant patients; patients undergoing procedural sedation; and short- term monitoring of patients.
HC-25 automatically identifies and quantifies the end-tidal CO2, inspired CO2 and respiration rate. The system uses with a 2.8 inch colorful LCD and its Lithium battery can support 8 hours at most. Additionally, it could save historical data automatically in a SD card and users could review these data through a PC software.
Description
Product Features
- Monitors end-tidal CO2 and inspired CO2 accurately at high respiration rate
- Gas monitor with cutting-edge water filter tube
- Easy to learn, easy to use-simplified menus and dedicated function keys
- Compensation including barometer pressure, oxygen, N20 and anesthetic gas
- 8 hours working time, 24 hours standby time
- 96 hours historical data replay on PC
Technical Specifications
| PARAMETERS | Specifications | |
| System | Sample mode | Sidestream |
| Principle | Non-dispersive Infrared (NDIR) | |
| Sample rate | 50mL/min | |
| Capnograph
|
Units | mmHg,% |
| Measure range | 0-114 mmHg, 0-15% | |
| Resolution | 0.1 mm Hg | 0 to 50 mmHg |
| 0.25 mm Hg | 50 to 114 mmHg | |
| Accuracy | ±2 mmHg | 0-40 mmHg |
| ±5% of reading | 40-114 mmHg | |
| Compensation | Barometric Pressure | Automatic measuring |
| N2O compensation | User Selectable | |
| O2 Compensation | Set by Host | |
| Respiration Rate | Measure range | 2-120 Breath per minute (BPM) |
| Resolution | 1 breath/min | |
| Accuracy | ±1 BPM or ±1%, whichever is greater | |
| Alarms | Indication | Audible; Visual |
| Silence | Yes; one minutes; two minutes or permanent | |
| Trend | Memory | 96-hours historical data saving |
| Display | Display on PC monitoring system | |
| Interface&Display | Keys | Menu/OK; Up; Down; Cancel; Start/Stop |
| Screen | 2.8 inch color LCD | |
| Resolution | 320 X 240 pixels | |
| Sweep speed | 6.25 mm/s, 12.5 mm/s | |
| Language | English; Chinese | |
| Physical Properties | Weight | About 1KG |
| Size | 15.2 cm (H) X9.2 cm(W) X 4.2 cm(D) | |
| 5.98 inch(H) X 3.61 inch(W) X 1.65 cm(D) | ||
| Power Requirements | Voltage supply | 220 AC; 50 Hz |
| Power consumption | About 2W typical | |
| Battery | A sealed lithium battery | |
| Battery life | At least 8 hours | |
| Recharge time | 4 hours | |
| Environmental | Operating temperature | 5- 35 °C |
| Storage temperature | -5-50 °C | |
| Operating humidity | 15% – 90%, non-condensing |
Be the first to review “Hand-held EtCO2+SpO2 monitor AM-HC-25”
Reviews
There are no reviews yet.